Copying
❒When the indicator to remove staple waste appears, call your service repre- sentative.
Reference
2
For how to replenish the staple supply, see ⇒ P.299 “d Adding Staples”. For how to clear staple jams, see ⇒ P.302 “e Removing Jammed Staples”.
When there is copy paper identical in size and direction to your original, the stapling position is see ⇒ P.338 “Stapling Position”
Note
❒You cannot change the stapling position during copying.
❒When the original image is rotated, the stapling direction turns by 90°.
❒With “Top” or “Bottom” selected as the stapling position, if no paper is avail- able oriented in the same direction as the original, the image will be rotated and the paper of the same size as the original but oriented in the different di- rection will be selected.
❒You can select the image on the fourth staple key as “Bottom” or “Top 2”.
❒The maximum original image size that can be rotated is as follows:
Metric version | A4 |
|
|
Inch version | 81/2" × 11" |
|
|
❒You cannot use the Image Rotation function when “Top Slant”, “Left 2” or “Top 2” is selected.
ASelect one of the four stapling positions.
BEnter the number of copy sets with the number keys.
CSet your originals in one of the following ways.
To set the original in the document feeder
A Set a stack of originals in the document feeder, then press the {Start}key.
50