Connect Copy (Option)

Relationship between Master Unit and Sub-unit System Settings

This section describes which System Settings are used by the master unit and sub-unit in Connect Copy mode.

Note

❒In Connect Copy mode the {User Tools}key on the sub-unit is disabled. To ac- cess the user tools on the sub-unit, you need to exit Connect Copy mode first.

Reference

See System Settings manual for details.

4

 

Symbol

Meaning

 

 

 

 

 

 

 

 

✩

The master unit and sub-unit use each setting

 

 

 

 

 

 

←

Both units use the master unit setting

 

 

 

 

 

 

—

Unrelated

 

 

 

 

 

 

★

Depends on the function

 

 

 

 

Menu

Master

Sub-unit

Remarks

 

unit

 

 

 

 

 

 

General

 

 

 

 

 

 

 

Function Priority

—

—

When the time set in the

 

 

 

“Copy Reset Timer” of the

 

 

 

user tools (Copier/Document

 

 

 

Server Features) on the mas-

 

 

 

ter unit passed and the Con-

 

 

 

nect Copy is canceled, and

 

 

 

then the time set in the “Sys-

 

 

 

tem Reset”of the user tools

 

 

 

(System Setting) passed, it re-

 

 

 

turns to the function defined

 

 

 

by the “Function Priority” of

 

 

 

the User Tools (System Set-

 

 

 

tings) setting.

 

 

 

 

Panel Tone

✩

✩

 

 

 

 

 

Ready Panel Tone

✩

✩

 

 

 

 

 

Copy Count Display

—

—

The copy counter is always

 

 

 

displayed in count up mode.

 

 

 

 

System Reset

—

★

Interrupt mode on the sub-

 

 

 

unit will be cleared by this

 

 

 

timer.

 

 

 

 

252