Other Functions
To interrupt an original being fed
APress the Interrupt key.
The Interrupt key lights up and scanning stops.
B Remove the originals that were being copied and set the originals you wish
to copy.
2
C Press the {Start}key.
The machine starts making your copies.
DWhen your copy job is finished, remove your originals and copies.
EPress the Interrupt key again.
The Interrupt key indicator goes out.
FWhen the display prompts you to, replace the originals that were being copied before.
GPress the {Start}key.
The previous copy job settings will be restored and the machine will continue copying from where it left off.
To interrupt copying after all originals have been fed
APress the Interrupt key. The Interrupt key lights.
Note
❒Copying will not stop yet.
BSet your original.
CPress the {Start}key.
The machine stops the original job and starts copying your original.
DWhen copying is complete, remove your originals and copies.
EPress the Interrupt key again. The Interrupt indicator goes out.
The previous copy job settings will be restored and the machine will continue copying from where it left off.
69