Connect Copy (Option)

Using Connect Copy

You can select Connect Copy mode from either of the two connected machines by pressing the [Connect] key. The machine you use becomes the master unit, and the other machine the sub-unit.

Limitation

❒Once Connect Copy is selected, you must carry out all operations on the mas- ter unit.

AMake sure the machine is in copy mode.

4

Note

❒If user codes are turned on, enter a user code programmed in the master unit with the number keys (up to 8 digits) then press the [#] key. You don't need to enter the user code for the sub-unit.

Reference

See ⇒ P.70 “User Codes”.

BPress the [Connect] key on the machine that is to be the master unit. When the key darkens, the two machines are connected.

❖ Master unit display

246