Programs

Programs

You can store frequently used copy job settings in machine memory and recall them for future use.

Limitation

 

❒ You cannot store the settings whether the Connect Copy function will be se-

2

lected automatically in a program.

Note

❒You can store up to 25 programs.

❒You can select the standard mode or program No. 25 as the mode to be set

when modes are cleared or reset is made, or immediately after the operation switch is turned on. ⇒ P.312 “General Features”

❒If you store more than one paper tray of a same size, same orientation, the pa- per tray prioritized with the program is selected first.

❒Programs are not cleared by turning the power off or by pressing the {Clear Modes}key. They are canceled only when you delete or overwrite them with another program.

❒This function can be used for scanning in copy and document server mode.

❒If your program contains settings that are not available in Connect Copy mode, the will be ignored.

❒If your program contains settings that are not available on sub-unit, they are ignored.

Storing a Program

AEdit the copy settings so that all functions you want to store in this program are selected.

BPress the {Program}key.

55