Copying
Auto Reduce/EnlargeThe machine can choose an appropriate reproduction ratio based on the paper and original sizes you select.
2
Note
❒You can not set papers into the A3/11" × 17" Tray Kit.
❒When you use Auto Reduce/Enlarge, refer to the following table for possible original sizes and directions:
❖ Metric version
Where Original Is Set |
| Original Size and Direction |
|
|
|
Exposure glass |
| A3 L, B4 L, A4 KL, B5 KL, 81/2" × 13" L *1 |
|
|
|
Document feeder |
| A3 L, B4 L, A4 KL, B5 KL, A5 KL, B6 KL, |
|
| 11" × 17" L,11" × 15" L, 81/2" × 11" KL, 81/2" × |
|
| 13" L *1 |
*1 You can select from 81/ | " × 13", 81/ " × 13" and 8" × 13" with the User Tools (Sys- | |
2 | 4 | |
tem Settings). See “Original: F/F4 Size Setting” in the System Settings manual.
❖ Inch version
Where Original Is Set |
| Original Size and Direction |
| |
|
|
| ||
Exposure glass |
| 11" × 17" L, 81/2" × 14" L, 81/2" × 11" | ||
|
| KL |
|
|
|
|
| ||
Document feeder |
| A4 KL, 11" × 17" L, 11" × 15"L, 81/2" × | ||
|
| 14" L, 81/ " × 11" KL, 51/ " | × 81/ " KL, | |
|
| 2 | 2 | 2 |
|
| 81/2" × 13" L *1 |
| |
|
|
|
| |
*1 You can select from 81/ | " × 13", 81/ " × 13" and 8" | × 13" with the User Tools (Sys- | ||
2 | 4 |
|
|
|
tem Settings). See “Original: F/F4 Size Setting” in the System Settings manual.
❒The machine can select a ratio in the range
❒For some originals, the original size might not be detected correctly. See ⇒ P.16 “Sizes Difficult to Detect”.
40