Lanier IS100e manual Replacing the Snap-in Pad Module, Disassembling Procedure, Troubleshooting

Models: IS100e

1 96
Download 96 pages 36.98 Kb
Page 91
Image 91
Replacing the Snap-in Pad Module

Replacing the Snap-in Pad Module

After scanning approximately 20,000 pages through the ADF, the pad may be worn out and you may experience problems with document feeding. In this case, it is highly recommended to replace the pad module with a new one. For ordering the pad module, please consult your nearest dealer and follow the procedure below to replace it.

Disassembling Procedure

1.Gently open the ADF front cover to the left.

2.Press both arms of the ADF snap-in pad module inwardly with your fingers to pull out the ADF snap-in pad module.

Do not touch the metal fingers of the ADF pad module. The edges are sharp and

touching them may result in injury.

Troubleshooting 7-13

Page 91
Image 91
Lanier IS100e manual Replacing the Snap-in Pad Module, Disassembling Procedure, Troubleshooting