The following is an example of the ThinkPad Setup program main menu.
4.Using the cursor keys, move to an item you want to change. When the item you want is highlighted, press Enter. A submenu is displayed.
5.Change the items you wish to change. To change the value of an item, press the + or - key. If the item has a submenu, you can display it by pressing Enter.
6.Press Esc to exit from the submenu.
7.If you are in a nested submenu, press Esc repeatedly until you reach the ThinkPad Setup program main menu.
Note: If you need to restore the settings to their original state as of the time of purchase, press F9 to load the default settings. You can also select an option on the Restart submenu to load the default settings or discard the changes.
8.Select Restart. Move the cursor to the option you want for restarting your computer; then press Enter. Your computer restarts.
Config menu
If you need to change the configuration of your computer, select Config from the ThinkPad Setup program main menu.
Notes:
•The default settings are already optimized for you. If you consider changing the computer configuration, proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.
•On each submenu, you can enable a function by selecting Enabled, or disable it by selecting Disabled.
The following submenu is displayed:
•Network: Set the LAN function.
•USB: Enable or disable USB related functions.
