Index | 83 |
optional Tractor 2 Feeder positions paper incorrectly 70
paper fed from Auto Sheet Feeder is skewed 71
paper fed in Auto Sheet Feeder jams at printer entrance 69
paper jammed in Auto Sheet Feeder 69
printer does not feed from Auto Sheet Feeder 70
printer does not feed paper 69 paper feed, troubleshooting
Auto Sheet Feeder feeds at incorrect rate 70
paper paths pull tractor 23 push tractor 23
paper sizes
supported by the printer 42 paper types
supported by the printer 42 pitch
locking 21 selecting 21
pitch lock disabling 21
print quality troubleshooting characters are wrong or
missing 73
dots are missing or print quality is poor 72
graphics do not print 73 incorrect line length 67 incorrect line spacing or overprinting occurs 74
incorrect number of lines on a page 73
lines do not start at left margin 67 print is too light 72
printer goes to Tear Off position before job finishes 66
smudged forms or print too dark 73
specified font or pitch is not printing or is changing 68
print troubleshooting buttons do not work 67 incorrect characters print, left
margin changes, or printing stops 68
left margin moves right during printing 67
Print test works, but printer does not print when attached to the computer 65
printer alarm sounds 66 printer is noisy 66
printer power switch is on, but the power light is off 67
printer sounds like it is printing, but does not print 66
printer speed slows 67
printing continues beyond edges of continuous forms 68
printer cleaning 56
features and functions 9 overview 7
parts 7 test 61
printer status checking 62
printer test page interrupting or stopping 61 running 61
printing demonstration page 11 from DOS 13
from Windows 13 network setup page 12
pull position tractor 43 pull tractor
converting 45 paper paths 23
push position tractor 43 push tractor
converting 44 paper paths 23
R
recycling
Lexmark products 57 WEEE statement 78
ribbon cartridge removing 56
S
safety information 6 security
supporting IPSec 59 supporting SNMPv3 59
using 802.1x authentication 60 setting
Top‑Of‑Form 39, 40, 41 Setup mode
Control options 52 Data options 51 Emulation options 54 Forms Macro options 50 Interface options 54 Main menu options 49 using 47
SNMPv3 59 supplies
ordering 56
T
Tear Off function using 24
Tear Off position setting 24
Top‑Of‑Form setting 39, 40, 41
tractor
pull position 43 push position 43
Tractor mode selecting 19 troubleshooting
checking an unresponsive printer 61
contacting Customer Support 74 restoring factory default
settings 58 troubleshooting, jams and misfeeds
paper is jammed in the printer 68 troubleshooting, paper feed
Auto Sheet Feeder feeds at incorrect rate 70
Auto Sheet Feeder feeds multiple sheets 71
Auto Sheet Feeder positions paper incorrectly 71
incorrect Top‑Of‑Form position 70, 71
jam in Tractor 2 Feeder 69 optional Tractor 2 Feeder does not
feed 70
optional Tractor 2 Feeder positions paper incorrectly 70
paper fed from Auto Sheet Feeder is skewed 71
