Lexmark E310 manual Power-OnSelf Test POST, 4044-XXX

4044-XXX

User Error Message	LED Status	Action
Font Error	Data blinking and	The print command is
	Error, Press Button on	requesting a font that
	solid	is not present or
		installed. The user
		must select a different
		font or try turning the
		Best Fit setting on and
		retry the print
		command.
Resource Save Off	Ready blinking and	The printer lacks
Deficient Memory	Error, Press Button on	sufficient memory to
	solid	enable Resource
		Save. It is
		recommended that
		the user install
		additional memory or
		set each link buffer to
		the Auto value.

Power-On Self Test (POST)

When you turn the printer On, it performs a Power-On Self Test. Check for correct POST functioning of the base printer by observing the following:

1.All LEDs turn on solid.

2.All LEDs turn off.

3.The cooling fan and fuser lamp turn on.

Note: The fuser lamp turns off once the thermistor reaches operating temperature. As the temperature drops, the lamp turns back on automatically.

4.The LEDs begin to turn on then off sequentially.

5.Once the fuser has reached operating temperature, the main motor turns on and the pick roller shaft assembly rotates to home position.

6.The Ready LED turns on solid while the Data LED blinks.

7.The engine/LVPS board checks the status of the input and exit paper feed sensors.

8.The main motor turns off.

9.The Data LED turns off.

Diagnostic Information 2-9