4.When the Error LED comes on solid,
5.Once the Error and Press Button LEDs start to blink, close the top cover.
6.The Ready LED comes on solid and the Error and Press Button LEDs continue blinking.
7.
8.Perform a long button press until all LEDs come on solid. The printer is in Hex Trace mode
9.To exit the Hex Trace mode, turn the printer power off.
Restoring Factory Defaults
Restoring factory defaults returns the printer settings to the original factory settings.
Perform the following steps to invoke factory defaults:
1.Turn the printer power off.
2.Open the top cover.
3.Turn the printer power on.
4.When the Error LED comes on solid,
5.Once the Error and Press Button LEDs start blinking, close the top cover.
6.The Ready LED comes on solid and the Error and Press Button LEDs continue blinking.
7.
8.Perform a long button press until all LEDs come on solid.
9.The printer is reset to factory defaults.