available on the parallel port. Each increment of the strobe adjust value means the strobe is sampled 50ns longer.
Perform the following steps to change the Parallel Strobe Adjust:
1.Enter the configuration mode.
2.Perform a double click button press seven times. This moves to the Parallel Strobe item on the configuration menu. The Parallel Strobe (Load Paper) LED is blinking.
3.The current Parallel Strobe setting is indicated by the Off/On/ Auto (Press Button) LED. When the LED is *off, the Parallel Strobe is set to normal. When the LED is on, the Parallel Strobe is set to +1. When the LED is blinking, the Parallel Strobe is set to +2. Perform a brief button press to select the Parallel Strobe setting.
4.Perform a long button press. All LEDs blink once, indicating the setting is saved.
5.Exit the configuration mode by turning the printer power off.
USB Port
This menu item allows the user to enable or disable the USB port. If the port is not being used, disabling it frees allocated memory to be used to process print jobs.
Perform the following steps to change the USB Port setting:
1.Enter the configuration mode.
2.Perform a double click button press eight times. This moves to the USB Port item on the configuration menu. The USB Port (Paper Jam) LED is blinking.
3.The current USB Port setting is indicated by the Off/On/Auto (Press Button) LED. When the LED is off, the USB Port is disabled. When the LED is *blinking, the USB Port is enabled. Perform a brief button press to select a different USB Port setting.
4.Perform a long button press. All LEDs blink once, indicating the setting is saved.
5.Exit the configuration mode by turning the printer power off.
