Lexmark 4044-XXX, E310 manual Configuration Mode Operator Panel Overlays

4044-XXX

Operator Panel Configuration Mode Button Definition

Term	Description	Result
Brief Button Press	Press the operator	This action moves
	panel button no longer	through the configura-
	than three seconds.	tion mode settings.
Long Button Press	Press and hold the	This action selects
	operator panel button	and saves the setting
	for more than three	for the menu item dis-
	seconds.	played. To indicate
		that the setting is
		saved, all LEDs blink
		once.
Double-Click Button	Press and release the	This action moves
Press	operator panel button	through the configura-
	two times. Each press	tion mode menu.
	and release action
	must be performed
	within a half second.

Perform the following steps to enter the configuration mode:

1.Turn the printer power off.

2.Open the top cover.

3.Turn the printer power on.

4.When the Error LED comes on solid, double-click the operator panel button.

5.When the Error and Press Button LEDs start blinking, close the top cover. The Ready LED comes on solid and the Error and Press Button LEDs continue blinking.

6.Double-click the operator panel button two times. The Load Paper LED comes on solid while the Error and Press Button LEDs continue blinking.

7.Perform a long button press. All LEDs blink once. The Ready LED stays on solid. The printer is in the configuration mode.

8.To exit the configuration mode, turn the printer power off.

Configuration Mode Operator Panel Overlays

When in configuration mode, the first menu item and its setting are displayed. The first menu item is the Parallel Port and is indicated by

3-4Service Manual