the solid Ready LED. The setting of the menu item is indicated by the status of the Press Button LED. To change the menu item setting, briefly press the operator panel button. Once the setting you want is indicated by the status of the Press Button LED, perform a long button press to save the setting. All LEDs come on while the setting is saved. To select other menu items,
There are ten menu items that can be selected by using the five LEDs as indicated by the following overlays on two passes through the configuration menu. The first time through the menu the LED selected is on solid. The second time through the menu the LED selected is blinking.
First pass - LED on solid overlay.
Parallel Port
Parallel NPA
Parallel Protocol
PPDS
CRLF/LFCR
Off/On/Auto
Operator Panel Button
Second pass - LED blinking overlay
Parallel Mode 1
Parallel Mode 2
Parallel Strobe
USB Port
USB NPA
Off/On/Auto
Operator Panel Button
Diagnostic Aids