Service Checks
Note: All service checks which involve measuring voltages of the circuit boards (except the controller board) must be performed with the engine/LVPS to controller board cable disconnected and the printer positioned on its left side. This provides the servicer access to the various circuit boards underneath the printer while supplying necessary power to the rest of the printer.
Cooling Fan Service Check
FRU | Action |
|
|
Model E310 | Make sure motor cable is properly |
Interconnect Board | seated in location CN408 on the |
Cooling Fan | interconnect board. Disconnect the |
| cable and check |
| |
| is not present, replace the |
| interconnect board. If the voltage is |
| present, replace the cooling fan. |
|
|
FRU | Action |
|
|
Model E312 | Make sure motor cable is properly |
Engine Board | seated in location CN3 on the engine |
Cooling Fan | board. Disconnect the cable and |
| check |
| V dc. If the voltage is not present, |
| replace the engine board. If the |
| voltage is present, replace the |
| cooling fan. |
|
|