Liebert POWER PROTECTION STATIC TRANSFER SWITCH manual User Settings, To set the event masks

STS2 Touch Screen Display

To set the event masks:

1.Access the Event Mask dialog box:

a.Select CONFIG.

b.Select EVENT MASK from the pop-up menu.

The Event Mask dialog box is displayed. See Figure 53.

2.Select the mask settings for each fault and alarm.

a.Select YES to enable the setting,

– or –

b.Select NO to disable the setting.

3.Select SAVE to keep the settings.

Figure 53 Event mask dialog box

User Settings

The User Settings choice allows you to adjust the user-accessible switch settings. Access is limited to qualified personnel via system security.

To access the User Settings dialog box:

1.Select CONFIG.

2.Select USER SETTINGS from the pop-up menu.

The User Settings dialog box is displayed. See Figure 54. The top six buttons access a series of sec- ondary dialog boxes to configure the various settings.

89