Lifescan Diabetes Management Software v2.3.1 Injection/Bolus/Pump, Types, If you select Bolus

OneTouch® Diabetes Management Software v2.3.1 User Manual	126
Table of Contents Index	W Previous Next X

When you see this:	You can do this:
Injection/Bolus/Pump	Specify the insulin dosing method types and units. Click on the
Daily Total	selection box that applies.
	“Injection” is the default selection.
	If you select “Injection”:
	■ Select an Insulin Type from the drop-down menu in the
	field. Insulin Types were created in the Medications Tab
	of the Patient Setup screen. If you want to add a new
	insulin type to the menu list, click on the Add Insulin
	link. This will take you to the Medications Tab of the
	Patient Setup screen where you can add new Insulin
	Types.
	■ Enter an amount from 0 to 250 in 0.1-unit increments.
	If you select “Bolus”:
	■ Enter an amount from 0 to 60 in 0.1-unit increments.
	If you select “Pump Daily Total”:
	■ Enter an amount from 0 to 100 in 0.1-unit increments.
Insulin Comments	Enter any information about your insulin record in the
	Comments field.

Table of Contents Index W Previous Next X 126