Lifescan Diabetes Management Software v2.3.1 manual OneTouch DMS Button Behavior

OneTouch® Diabetes Management Software v2.3.1 User Manual	18
Table of Contents Index	W Previous Next X

OneTouch® DMS Button Behavior

The following Command buttons appear on several OneTouch® DMS screens. Their actions are common to all screens unless otherwise noted. A button is enabled (active) if the label on the button is in black font. A button is disabled (not active) if the label on the button is in gray font.

When you click on this:	You can do this:
	Add a new patient name and profile to OneTouch® DMS
	database. After clicking on Add New Patient, you will go
	to the General Tab of the Patient Setup screen to begin
	entering information. If you just created a new database,
	only the Guest patient record exists. Before you can
	transfer readings from a meter to a patient other than
	Guest, you will have to add that patient name to the
	OneTouch® DMS database.
	Manually add a new data record to the database. After
	clicking on Add New Record, the Software will remain
	at the current screen where you can continue to add
	data records.
	If you are modifying a data record via the Report screens,
	you may add other types of data records by clicking on
	the Add New Record button. This will activate the other
	Tab selections on the Manual Entry-A screen.
	Display a new report after updating patient name,
	date range, or Report format.
	Copy one or more database records to a separate file
	for storage. Archiving lets you manage the size of the
	OneTouch® DMS database by removing older data that
	you may no longer need to review. This way you can keep
	the database size at a minimum so the OneTouch® DMS
	works most efficiently.

Table of Contents Index W Previous Next X 18