OneTouch® Diabetes Management Software v2.3.1 User Manual

67

 

 

 

 

Table of Contents Index

W Previous Next X

Schedule Tab

The Schedule Tab lets you customize the start and end times for the 7 pre-defined Meal Slots that are stored in the meter (see Figure 2.16). The meter will tag and record all meter readings with a Meal Slot designation. Each Meal Slot start time begins when the previous one ends.

So when you change the From time of one Meal Slot, OneTouch® DMS automatically changes the To time of the previous Meal Slot.

Note: This Tab is only available when connecting a OneTouch® UltraSmart® Meter.

Figure 2.16

Note: To ensure that glucose readings appear in OneTouch® DMS Reports in the same meal slot that was used to store the readings in the meter, it is important that the meal schedule stored in the meter matches the schedule stored for that patient in OneTouch® DMS. If you change the schedule stored in the meter, ensure that the schedule for that patient in OneTouch® DMS is changed as well.

If the schedules don't match, glucose readings that are transferred to OneTouch® DMS may be displayed in an inappropriate meal slot. If any out-of-target readings appear in the wrong meal slot, this may lead you to misinterpret the information when tracking and trending data.

Table of Contents Index

W Previous Next X

67

Page 67
Image 67
Lifescan Diabetes Management Software v2.3.1 manual Schedule Tab