
FIGURE 1: RANGER 8 / TIG MODULE CONNECTION DIAGRAM
– 6 –
REGULATOR FLOWMETER
ARGON GAS CYLINDER
WARNING
Do not operate with panels open. | Keep guards in place. |
Disconnect NEGATIVE | Keep away from moving parts. |
before servicing. | Only qualified personnel should install,use |
Do not touch electrically live parts. | or service this equipment. |
| O |
|
|
|
| HF |
|
| CURRENT |
POWER | HIGH FREQUENCY | AFTERFLOW | CURRENT CONTROL | CONTROL |
|
|
|
| SWITCH |
LINCOLN |
|
|
| |
ELECTRIC |
|
| WARNING | |
TO GAS |
|
|
|
|
INPUT
FITTING
INSTALLATION
TIG MODULE
K814 ARC START SWITCH
WELDING CABLES MUST BE PROPERLY SIZED FOR THE CURRENT AND DUTY CYCLE OF APPLICATION
M17530
NOTE: This diagram is for reference only. It was accurate at the time of printing , however Lincoln Electric reserves the right to make improvements and modifications as necessary, if you supect this information to be inaccurate, write to the Service Department for a replacement. Give the equipment code number..