Lincoln Electric IM528-B manual Ranger 9 / TIG Module Connection Diagram

FIGURE 3: RANGER 9 / TIG MODULE CONNECTION DIAGRAM

WARNING

Do not operate with panels open.

Disconnect NEGATIVE (-) BATTERY LEAD before servicing.

Do not touch electrically live parts.

REGULATOR

FLOWMETER

Keep guards in place.

Keep away from moving parts.

Only qualified personnel should install,use or service this equipment.

– 10 –

ARGON GAS CYLINDER

TO GAS

INPUT FITTING

	O
	HF			CURRENT
POWER	HIGH FREQUENCY	AFTERFLOW	CURRENT CONTROL	CONTROL
				SWITCH
LINCOLN
ELECTRIC				WARNING

K870 FOOT AMPTROL

-OR-

K963 HAND AMPTROL

-OR-

K814 ARC START SWITCH

INSTALLATION

TIG MODULE

WELDING CABLES MUST BE PROPERLY SIZED FOR THE CURRENT AND DUTY CYCLE OF APPLICATION

4-19-96D

M17532

NOTE: This diagram is for reference only. It was accurate at the time of printing , however Lincoln Electric reserves the right to make improvements and modifications as necessary, if you supect this information to be inaccurate, write to the Service Department for a replacement. Give the equipment code number..