TIG MODULE –11 –
INSTALLATION
Ranger 10 and Ranger 300 D Installation
Table 4 lists the required and optional equipment
for installing and operating the TIG Module with a
Ranger 10 or Ranger 300 D.
Refer to Figure 4 for the TIG Module/Ranger 10
connection diagram and to Figure 4A for the TIG
Module/Ranger 300 D connection diagram. Make
sure all connections are tight before proceeding.
TABLE4RANGER 10 / RANGER 300 D AND THE TIG MODULE
REQUIRED EQUIPMENT
Control
Cable Contactor
Kit Work and
Electrode
Leads from
Ranger 10 to
TIG Module
TIG
Torch Work
Lead Shielding Gas,
Regulator,
Flowmeter
Arc Start
Switch
- OR -
Amptrol
K936-3
9-pin to
6-pin
plus
115V Plug
K938-1
Field
Installed
User Supplied;
Length as
Req’d. Cable
Sized to Match
Current and
Duty Cycle
User
Supplied User Supplied;
Length as
Req’d. Cable
Sized to Match
Current and
Duty Cycle
User
Supplied See
Optional
Equipment
Below
RANGER 10 / RANGER 300 D AND THE TIG MODULE
OPTIONAL EQUIPMENT
Control
Cable
Extension
Water
Valve Arc Start
Switch Hand
Amptrol Foot
Amptrol Docking
Kit
K937 - [ ]
Extension
9-pin to 9-pin
K844-1 K814 K963 K870 K939-1
Mounts to
Ranger 10
Roof