Lorex 16 channel security dvr with 500GB hard drive, remote viewing manual About IP Ranges

Appendix F: Assigning A Static IP To Your DVR

About IP Ranges

It is recommended to set the static IP address below the scope of your router. For example, if the router assigns an address ending between 100-254, choose an address ending between 2-99.

Step 2 of 2: Enter the desired static IP address in the router

Prerequisites:

• Obtain the DVR’s MAC address

To enter a static IP into the router:

1.Under the main menu, click on LAN & DHCP Server.

2.Configure the following:

•Static DHCP: Select Enabled and then click Apply.

•Name: Enter the desired name of your device

•IP Address: Enter the IP address that you wish to make static. This IP address must be the same address specified in the DVR.

•MAC Address: Enter the MAC address of your DVR.

Select Enabled

Add

3.Click Add.

• The DVR info appears in the Static DHCP list.

Enter DVR name, IP address and

Mac address

Once the DVR has been added to the Static DHCP list, you have successfully created a static IP address for your system.

109