Lorex 16 channel security dvr with 500GB hard drive, remote viewing manual

Remote Viewing

Configuring the system Substream

Sub stream refers to the remote streaming of video content (i.e. when you connect to your system via DDNS).

To configure the system’s substream:

1Click the Remote Setting tab>Network>SubStream.

2Configure the Sub stream settings:

•Channel: Select the channel you wish to apply the settings to.

•Resolution: Select the desired recording resolution.

•FPS (Framerate): Select the desired recording frame rate. Note that higher frame rates require greater bandwidth consumption during remote viewing.

•Bit Rate: Select the desired video bit rate.

•Audio: Select whether you want the system to record audio (audio cameras required, not included).

3Click Save to apply your settings.

71