Lorex 16 channel security dvr with 500GB hard drive, remote viewing Restoring Default Settings

Remote Viewing

Restoring Default Settings

To restore the system’s system defaults:

1Click the Remote Setting tab>Advanced>Load Default.

2Select the menus that you wish to restore to factory defaults.

3Click Save to restore system defaults for the selected items.

Configuring Event Settings

The Event Settings tab allows you to configure how the system behaves when a system event occurs (i.e.hard drive error, video loss). This is useful if you want your DVR to notify you if there is a potential system problem.

To configure the system event settings:

1Click the Remote Setting tab>Advanced>Events.

2Configure the following:

•Event Type: Configure the event that triggers the system to send an alert.

•Enable: Select enable to activate the system from notifying you if an event occurs.

•Buzzer: Select ON/OFF to enable/disable the system buzzer.

•Show Message: Select the checkbox to enable the system to display a warning message when an event occurs.

•Send Email: Select the checkbox to enable email notifications. Email notification must be enabled.

•Alarm Out: Enable or disable the alarm out panel.

•Latch Time: Configure the system latch time after an event occurs.

3Click Save to restore system defaults for the selected items.

80