Lorex 16 channel security dvr with 500GB hard drive, remote viewing Formatting a USB memory stick

Using the Main Menu

Device

The Device menu allows you to configure hard drive, PTZ, settings.

Configuring Hard Drive settings

To format the hard drive:

1From the main menu, click Device.

2Click the checkbox under Select to choose the drive you wish to reformat.

3Click Format HDD.

4When the warning window appears, click OK. Wait for the system to format the hard drive.

To set the hard drive recording mode (loop recording or linear recording):

1From thhe main menu, click Device>HDD.

2Select the checkbox beside the hard drive you wish to configure.

3In the "Overwrite" drop-down menu, select Auto. (recommended), or select the desired duration the hard drive should retain its data.

NOTE: If overwrite recording is enabled,thesystem’sharddrive automaticallyre-writesthehard drive’s oldest content (first in first out).

4Click Apply to save your settings.

Formatting a USB memory stick

1Insert a USB memory stick into the rear panel of the system.

2In the main menu, Device>HDD.

3Under the "Select" checkbox, select the USB memory drive.

4Click Format USB, and follow the on-screen instructions.

Configuring PTZ settings

If you have a PTZ (pan/tilt/zoom) camera, you will have to configure the settings on the system. Please note that you will need your PTZ manufacturer’s documentation in order to configure the PTZ camera on this system.

To configure PTZ settings:

1In the main menu, click Device>PTZ.

43