SCANNER CONFIGURATION MANAGER
Settings
Following is a detailed discussion of each of the settings, their at- tributes, and the effects each of these will have on data output from your MS860.
Beeps and Delays
The three attributes for “Beeps and Delays” are: “Beep Tone”, “Interblock Delay”, and “Intercharacter Delay”.
Beep Tone
Select a value from “None” to “High” to set the loudness of the tone, or select “Low to High” or “High to Low” to set the characteristic of the tone.
Default is “Medium”.
Interblock Delay
Interblock delay is the time duration that can be inserted between one block of data and another. This function is analogous to the time duration required between dialing a phone number’s country code and the phone number itself. The interblock delay can be inserted via SCM’s Data Editing function (see page 57).
Default is “10 ms”.
Intercharacter Delay
Intercharacter delay is the time duration between data characters sent from the scanner to the computer. Intercharacter delay is usually inserted when the data flow must be slowed down to accommodate a slower computer.
Default is “1 ms”.
Keyboard Wedge
Your Unitech reader contains a
The four keyboard wedge parameters are listed on the following page.
MS860 WiFi Manual | 40 |
