Scanner Configuration Manager | Unitech MS860 manual

SCANNER CONFIGURATION MANAGER

Data Editing, continued

Note:

Even if the original bar code data is not modified, if additional charac- ters are to be added (see “Add New” below) the original Start Param- eter must be defined as From Position “1” and the End Parameter defined as “All Remaining”, otherwise, none of the original data will be output.

Add New adds characters (printing and non- printing) to the data output from the MS860. These characters can be added before, after, and within the actual scanned data. Pre-defined characters include:

z<t> Tab

z<r> Carriage Return

z<n> Line Feed

z<d> Any Digit (data editing)

z<a> Any Letter (data editing)

z<*> Interblock Delay (data editing)

z<“> (quotation marks)

z<dd> Character in hexadeximal notation

z<<> < (less than)

z<>> > (greater than)

Characters must be bracketed by <> symbols.

Letters and numbers should be represented in hexadecimal format (accessable in a linked menu) to avoid confusion. For instance, the lower-case letter “t” should be entered as <74> and the numeral “5” should be entered as <35>.

Function codes (F keys, Cursor Up, Enter, etc.) can also be inserted via hexadecimal code (accessable in a linked menu).

Delete removes existing modifier strings.
Move Up / Move Down (pictured to the right) moves the
modifiers up and down in relation to each other. The top modifier
will be performed first and each one down the list will be per-
formed in sequence. The original data (modified or unmodified,
part or whole) will be output according to its position in the modifier
sequence.	58
MS860 WiFi Manual	58

Image 60

Unitech MS860 manual Scanner Configuration Manager

Contents

MS860 WiFi Bar Code Scanner Table of Contents Introduction Introduction Quick Start Important Notes Importantscanner Ndotesaccessories Scanner Parts Scanner LED Buzzer Cradle Parts Cradle LEDs How to determine if the scanner needs recharging Charging the Scanner Network Settings Modifying the WiFi settings Glossary IP Address WEP Network Settings Using SCM for Scanner Network Setting Network Settings Network Settings Network Settings Using BAR Codes to SET Scanner Network Example IP Space 192.168.1.250 CR Network Settings Example Default CR Installing Virtual COM Network Settings Start Virtual COM Network Settings Vcom should automatically create a virtual com port for Glossary ConfigureWEP the virtual com port using monitor.exe Keep the default settings of the server port and server IP Network Settings Network Settings Start It Up Scanner Configuration Manager Try It Beeps and Delays Interblock DelayIntercharacter Delay Keyboard Wedge Function Code Caps-LockLanguage Use Numeric Keypad Baud Rate ParityData Bit Handshaking RS232 BCC CharacterTime Out Data Direction Scanner Port Terminator Use Code ID Double Verification Settings Function Code RS232 BCC Character Scanner Port EAN-13 Label Code IV or Scanning Mode Label Type Aim Function for Long Range Engine Aiming Time for Long Range EnginePreamble Postamble Bar Code Symbologies Code Interleaved 2 Standard 2 of 5 / Toshiba Code China Postal Code EAN MSI / Plessey Code Codabar UPC-A UPC-E EAN-13 EAN-8 Delta Code Supplement Code for UPC-E, ISBN, EAN-13 Label Code IV Data Editing QualifierModifier Scanner Configuration Manager Arrange Formulas Everything Else Formula Programming VIA Scanner Input Introduction Quick Setup Bar Codes Beep UPC-E Interblock Delay Intercharacter DelayBeep Tone see page 40 0 None Medium Keyboard Interface Baud Rate 9600Parity None Second Data Direction for terminal wedge see Send to Host Terminator EnterCode ID Define Code ID Scanning Mode Double VerificationTrigger Label Type Ppoo Symbologies Group Code 39 seeCheck Digit Not Calculate Interleaved 2 of 5 ITF see Standard 2 China Postal Code Toshiba Code Code 32 Italian Pharmacy seeTelepen UCC/EAN 128 see Define the EAN 128 Fields Separator Define a Separator for Double LabelsDefine Minimum and Maximum Length Code 128 see MSI / Plessey CodeNo Send Check Digit Double Module Code 93 see Code 11 Special see Codabar seeNo Send Label Code IV and V see Exit EAN-13 see EAN-8 Supplement Code see Off / OnDelta Distance Code see Qualifiers Modifiers Special Characters Code Type Formula FormatSpecial Characters in this section TCP/IP Function Codes for PC Ascii Chart Characters in parentheses represent Extended Code = %H ~ %S Delete %T ? %J NUL %U @ %V \ %L `%W # /C $ /D + /K Programming VIA Scanner Input SP Space Specifications Mechanical Troubleshooting Generic Scanner Troubleshooting Tips Problems and Solutions Problem No output from scanner Troubleshooting BAR Code Test Chart BAR Code Test Char