NETWORK SETTINGS
5. Define the RS232 settings according to page 88, RS232 Default Step 8: If “Yes” was selected in Step 7, fill in
Settings, click “OK”
the WEP parameters and type a passwork in the Key 1 field. Click “Next”.
Step 9: Select “Yes” or “No” for Power
Saving Mode.
6.Press the scan button to scan the barcode. Step 10: Verify the information is correct.
Click “Back” to modify the configura-
tion if necessary.
Click “Next” when finished.
Step 11: Setup is complete.
Step 12: Select an appropriate printer to produce a setup sheet containing bar codes. Use your MS860 scanner to scan the barcodes on the sheet sequentially to configure the scanner.
30 | MS860 WiFi Manual |
