Lorex 16 channel security dvr with 500GB hard drive, remote viewing manual Prerequisites, Internet

Remote Connectivity

Accessing your DVR within a local network (LAN)

You can connect to your DVR through Internet Explorer through the local area network (LAN).

NOTE: This method only works if your computer is on the same network as the DVR.

Prerequisites

•Connect the ethernet cable from your router to the DVR

•DVR must be in the same network as the computer connecting to the DVR

To connect your DVR to the Local Area Network (LAN):

1Power off your system by disconnecting the power cable from the rear panel.

2Connect an Ethernet cable (included) to the LAN port on the rear panel of the system. Connect the other end of the Ethernet cable to an empty LAN port (usually numbered 1~4) on your router.

3Reconnect the power cable to power the system back on. NOTE: Make sure the power switch is set to I.

Ethernet Cable

INTERNET

(not required for local viewing)

ROUTER	PC
(Not Included)
	(Not Included)

51