Lorex 16 channel security dvr with 500GB hard drive, remote viewing manual

Using the Main Menu

2Configure the following according to your PTZ camera’s specifications:

•Channel: Select the channel the PTZ camera is connected to.

•Protocol: Select from Pelco-D or Pelco-P

•Baude rate: Select the PTZ camera’s baude rate

•Data Bit: Select from 5~8 data bits.

•Stop Bit: Select from 1 or 2 stop bits.

•Parity:SelectfromNone,Odd,Even,Mark or Space.

•Cruise: Select On to enable PTZ cruise.

•Address: Enter the PTZ camera’s address Use the Copy To drop-down menu to copy the PTZ settings to multiple channels.

3Click Apply to save your settings.

44