Lorex 16 channel security dvr with 500GB hard drive, remote viewing manual

Appendix H: Connecting a PTZ Camera

Appendix H: Connecting a PTZ Camera

You can connect RS-485 PTZ cameras (not included) to the PTZ Control Block on the rear panel.

To connect a PTZ camera to the system:

1Connect the Transmit Cable to the TX (+) port of the PTZ block on the rear panel.

• 16-channel models: Connect the Transmit Cable to the RS-485 + port.

2Connect the Receive Cable to the TX (-)port of the PTZ block on the rear panel.

• 16-channel models: Connect the Receive Cable to the RS-485 - port.

3Connect the video cable to a BNC port.

BNC

TX+

TX-

To enter PTZ camera settings in the DVR:

•Enter the PTZ protocol settings into the PTZ setup menu. Consult your PTZ camera’s user’s guide for PTZ protocol details.

111