Lorex 16 channel security dvr with 500GB hard drive, remote viewing manual

Remote Viewing

Configuring E-mail Notification Settings

To configure e-mail notification settings:

1Click the Remote Setting>Network> Email

2Configure the following:

•Email drop-down menu: Select Default to use the default Lorex email server. Select Custom to use your custom SMTP email server.

•SSL: Enable or disable Secure Socket Layer (SSL).

•SMTP Port: Enter your SMTP port number*.

•SMTP Server: Enter your SMTP server address*.

•Sender Email: Enter the e-mail address that is sending out the notification*.

•Sender Password: Enter the e-mail password*.

•Receiver Email: Enter the email address of the person receiving the notification.

•Interval: Select the e-mail notification interval range.

*Available only when you select Custom email settings in the Email drop-down menu.

3Click Save to apply your settings.

Configuring your system to "beep" during motion

You can set your system to "beep" during motion. This is useful to notify you if someone enters or exits a premise.

To configure the system to "beep" during motion:

1Click the Remote Setting tab>Motion.

2Beside the Channel drop-down menu, select the channel you wish to configure.

3Select the "Enable" checkbox.

4Beside the Buzzer drop-down menu, select the buzzer duration.

5In the video window, select the area you wish to monitor for motion.

6Click Save to apply your settings.

Result: The system beeps when it detects motion, and a green "M" icon appears. The green "M" icon indicates that the system is only detecting motion, but not recording. To have the system record motion events, enable motion recording in the recording calendar (Remote Setting tab>Record>Schedule).

72