Lorex 16 channel security dvr with 500GB hard drive, remote viewing manual Event Recording

Recording

Recording

By default, the system is set to immediately record video from connected cameras in Continuous Recording Mode.

•

C

.

Recording—Continuous: Normal, continuous recording

You can set the system to stop recording once the hard drive is full, or to continually record by overwriting previously recorded data. For more details, see “Configuring Hard Drive settings” on page 43.

Event Recording

The system also includes motion recording:

•

M

Recording—Motion: The system records when motion is detected by the camera

Recording Audio

The system can also record audio for up to 4 channels.

ATTENTION: Audio capable cameras (not included) or self-powered microphones are required in order to record audio on the system.

To enable audio recording:

1Connect the BNC video cable from the camera to one of the BNC ports on the rear panel of the system. For example, connect the camera to BNC port 1.

2 Connect the RCA audio cable from the camera to the corresponding audio channel. Following the example in step 1, you would connect the cable to audio port 1 (AIN1).

Connect an RCA audio cable into the "AIN" (Audio In) ports.

19