Appendix B: Connecting Motion / Alarm Devices

5.Beside Camera ID, select the camera’s system address. This number is shown when the PTZ camera first boots up.

• This number may sometimes be called "Dome ID".

6.Click Control Enable, and use the mouse scroll wheel to select O.

7. Click Protocol, and use the mouse scroll-wheel to select the protocol of your PTZ camera.

PTZ Control Interface

To open the PTZ camera controls:

1.Click the channel with the PTZ camera.

2.Click the PTZ button () in the status bar.

• The PTZ menu window opens. (PTZ camera required, not included, EDGE+ only).

Camera Navigation Controls

Preset Buttons

PTZ Speed Zoom In/Out

 

Controlling Pan, Tilt, Zoom

•To pan, tilt, or zoom the camera, drag the red circle in the navigation controls.

•Click the arrow buttons to pan and tilt the camera in small increments.

•Drag the Speed Slider to adjust the camera’s pan and tilt speed.

Arrow button

Zoom buttons

Speed Slider

97