Lorex LH300 Series CHANGING PORTS ON YOUR SYSTEM, Example, port, NOTE:, Use the, ESC button, any desired, Right-click, To change the port number:, Changing Ports On Your System

Changing Ports On Your System

CHANGING PORTS ON YOUR SYSTEM

For added security, we strongly recommend changing HTTP port 80 on the system to any desired port—the port must not blocked by your Internet service provider (ISP).

NOTE: Please contact your ISP for complete information on available ports in your area.

If you change the default port on the system from 80 to a different value, you MUST enter http:// and the port number after the IP address.

Forexample,ifyouchangeyourportnumberfrom 80 to 85, you MUST enter port 85 after the IP address, i.e. http://192.168.5.120:85.

Prior to changing ports on your system, you must connect your system to your network using the included Ethernet cable.

There is a semi-colon after the IP address, followed by the port number.

ExampleLet’s say you want to change the HTTP port on your system from 80 to 85.To change the port number:1.Click to open the Main Menu and then click . The LAN menu opens.2.From the LAN menu, select HTTP Port.

3.Use the scroll-wheel (or press on the remote control) to change the port number to 85.

Figure 15.4 Change the HTTP port

4.Right-click to exit and save your settings (or press the ESC button on the remote control.

5.Disconnect the power cable from the rear panel of the system. Let the system power-down for 15~20 seconds and then reconnect the power cable.

6.To confirm that the new port number is saved on your system, the button twice on the remote control to view the System Information.

Figure 15.5 Confirm the new HTTP port

42