Getting Started

Lorex EDGE: Front PanelAll models

1 2 3 4

1.IR Receiver: Internal IR receiver for the remote control.

2.USB port: Connect a USB flash drive for data backup and firmware updates (download from website).

3.Power Indicator: LED indicator for system power. When system is powered on, LED is lit red.

4.HDD Indicator: LED indicator for internal hard drive. When in continuous recording mode, LED pulses red.

Lorex EDGE: Rear Panel4-channel models

1

2

3

4

5

6

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

9

10

1.Exhaust slots: Slots to let heat escape from the internal hard drive. Do not block. Allow for proper ventilation.

2.DC 12V: Port for 12V DC 2.5 A power adapter (included).

3.Alarm I/O: Input/output port for alarm / relay (D-sub 9 connector required—not included).

4.Audio In: Input ports for audio enabled cameras.

5.Video In: BNC input ports for 4 BNC cameras.

6.USB Port: Port for a USB mouse.

7.LAN: Networking port for a 10/100 Base-T RJ-45 network cable (included).

8.VGA: Port to connect a VGA monitor (not included)

9.Audio Out: Output for two audio channels.

10.IR: Port for the Flex-IR Extender.

11.Ground Port

3