Lorex LH300 Series PPPoE, DDNS, Bitrate, IDs7, MUST, NOTE:, LOCALLY, ATTENTION, bitrate speed, http://lorexddns.net, 1.Click the PPPoE tab, To open the Setup menu:

Setup

Use Setup to configure your network settings and video streaming options.

NOTE:Allusers (by default,IDs7,8, and9) have access to the Setup menu; only the system administrator (by default, ID 9) may configure PPPoE and DDNS settings.

To open the Setup menu:• From the main screen, click the(Setup button). By default, the System Status screen opens.

Figure 23.0 System Status in Setup menu.

PPPoE

Figure 23.2 PPPoE menu (8/16-channel)

To change PPPoE settings:1.Click the PPPoE tab.2.Under the PPPoE Status, select ON.3.In the corresponding text fields, enter your PPPoE Username and password.4.Click Apply to save your settings.

DDNS

Bitrate

Lorex provides a free DDNS service for use with your DVR. A DDNS account allows you to set up a web site address that points back to your Local Network.

ATTENTION: You MUST enter your DDNS information LOCALLY before attempting remote access.

Figure 23.1 System Status in Setup menu (8/16-channel)

To change Bitrate speed:1.Click the Bitrate tab.

2.Under Bitrate, select a bitrate speed. The higher the bitrate, the better the quality of the video stream. Adjust the bitrate speed to best suit your connection.

3.Click Apply to save your settings to the system.

Figure 23.3 DDNS menu.

Visit http://lorexddns.net to register for Lorex’s free DDNS service. For more details on setting up a free Lorex DDNS account, see “Setting Up DDNS” on page 76.

NOTE: You must register for Lorex’s free DDNS service prior to configuring DDNS settings.

52