Using the Main Menu

LANConfigure network settings.From the Main Menu, click . The LAN menu opens.

NOTE:Somenetworkingknowledgeisrequired when adjusting options in the LAN menu.

Easy Connect

Use the Easy Connect menu to enable Easy Connect, and view the Easy Connect log.

For details on connecting to your system remotely using Yoics, see “Remote Viewing Using Easy Connect” on page 61.

Figure 15.0 LAN menu

Figure 15.1 : Easy Connect menu.

To configure network settings:1.Select the following, and use the scroll-wheel to change values:•IP•Mask•Gateway•DNS Server•DHCP Enable•HTTP Port•Easy Connect2.To save your settings, right-click until you return to the main screen.

NOTE: DCHP allows you to quickly connect to your network by obtaining an IP address from therouter.Aftertheinitialsetup,werecommend that you disable DHCP and change the last set of numbers in the IP address between 2~99. For example, if your IP address is 192.168.0.107, change the last digits to 90 (i.e. 192.168.0.90). This ensures that port forwarding will not change in the event of power failure or resetting of your network.

NOTE: For added security, we strongly recommend changing HTTP port 80 on the system to any desired port not blocked by your Internet service provider (ISP). For details on changing ports on your system, see “Changing Ports On Your System” on page 42.

To enable Easy Connect:

•Select Yoics Enable, and use the scroll wheel to select O to enable Easy Connect; X to disable Easy Connect.

To reset Yoics:•Click Reset Yoics.

NOTE: It may take several minutes for the changes to take effect. Restarting Yoics is used for troubleshooting only.

To view the Yoics Log:•Click Log File.

Figure 15.2 : Log File window.

40