Starting the System

Using the Split-Screen SelectorATTENTION: Split-Screen Selector is only available on 8/16-channel models only.

If your system has 8/16-channels, you must choose a split-screen configuration using the Split-Screen Selector built into the system’s interface. The Split-Screen Selector allows you to choose the grid configuration for the main display during live viewing and playback: quad, 9-split, or 16-split (16-channel only).

Live Viewing

To use the Split-Screen Selector:

1.Click to open the Split-Screen Selector. If you are in full-screen, click to view quad, then click again to open the Split-Screen Selector. Grid configurations appear in circles onscreen.

2.Click a grid configuration for live viewing:

•8-channel: Choose from quad (CH1~4, CH5~9) or 9-split (CH1~8; the bottom-right square will remain blacked out).

•16-channel: Choose from quad (CH1~4, CH5~9, CH9~12, CH13~16), 9-split (CH1~9, CH10~2), or 16-split (CH1~16).

 

 

 

 

Figure 4.4 Split-Screen Selector (8-channel)

 

 

 

Figure 4.5 Split-Screen Selector (16-channel)

Playback

To use the Split-Screen Selector:

1.During playback, click at anytime to open the Split-Screen Selector.

NOTE: The Split-Screen Selector will open even if you are viewing playback in full-screen.

2.Click a grid configuration for playback.

15