Starting the System

STARTING THE SYSTEM

To power the system ON:

• Connect the power cable to the DC 12V port on the rear panel of the system

At startup, the system performs a basic system check and runs an initial loading sequence. After a few moments, the system loads a live display view (Live Mode).

NOTE: Make sure all cameras and cables are properly connected prior to powering on the system.

Onscreen Display

4-channel

1

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

2

4

5

 

 

 

 

 

 

6

 

 

 

 

 

 

Figure 4.0 Live viewing with on-screen display (4-channel model)

1.System Status Bar: Displays mode, password type, recording mode, language, and status of devices (HDD and USB).

2.Display: Full-screen single channel and Quad split-screen available in Live Viewing and Playback modes; if cameras are disconnected, channels display a blue screen with the text, "VLOSS."

11