Remote Viewing Using Easy Connect

3. Click Easy Connect in the LAN menu. The Easy Connect window opens (Figure 5).

Ablue"O"indicatesYoicsis enabled.

A red "X" indicates Yoics is disabled.

Only click to restart Yoics service in case of a connection problem with Yoics.

Allow 10 minutes for the changes to take effect.

Figure 25.4: Easy Connect menu.

4.Under Yoics Enable, a blue "O" indicates Yoics is enabled. Use the mouse scroll wheel to turn Yoics on or off.

NOTE: Click on Reset Yoics onlyif you have a connection problem with Yoics. Changes take effect in 10 minutes. After 10 minutes, re-login to your Yoics account.

Registering for an Easy Connect account

After you upgrade your DVR with the Yoics Easy Connect firmware, you must create a Yoics

account and register your device with Yoics.To register your DVR with Yoics:1.Go to http://lorex.yoics.com and register for an account.NOTE: There is no "www" in front of the address.

You must connect your DVR to a router connected to the internet before registering a Yoics account.

This ensures thatupon accountactivation, Yoics will automatically detect your DVR.

64