Getting Started

Lorex EDGE+ : Front PanelAll Models

1

2

3

4

5

6

7

8

1.IR Receiver: Internal IR receiver for the remote control.

2.USB port: Connect a USB flash drive for data backup and firmware updates (download from website).

3.Power Indicator: LED indicator for system power. When system is powered on, LED is lit red.

4.HDD Indicator: LED indicator for internal hard drive. When in continuous recording mode, LED pulses red.

5.LIST: Opens the Event List menu.6.OSD: Show/hide the on-screen display.7.Primary Controls:

•MENU: Opens the system main menu.

•: Press to open the Split-Screen Selection menu (8 / 16-channel only).

From full-screen single channel view, changes display view to Quad split-screen (4-channel model only)

•S/CH+: Move cursor in menus up; Channel Up.

•X/FWD: Move cursor in menus right; during playback, increase forward playback speed (5X, 15X, 60X).

•W/REW: Move cursor in menus left; during playback, increase reverse playback speed (5X, 15X, 60X)

•/ : Start/pause forward playback.

•T/CH-: Move cursor in menus down; Channel down.

•ESC: Go back / exit menus.

•: Confirm menu selections. Press twice in live viewing to access system information.

8.: While in Event List menu, press to delete a selected event (no confirm or undo).

•: During Live Mode and Playback; Press to take a screenshot of the main display—USB flash drive must be connected

(8/16-channel only).•Increase/Decrease buttons:

•: Increase the value of selected menu option.

•: Decrease the value of selected menu option.

5