Getting Started

Remote Control

The remote control is the secondary input device for navigating the system’s graphical user interface.

To use the remote control:1.LIST: Open the Event List menu.2.OSD: Show/hide the on-screen display.3.Primary controls:

•MENU: Opens the system main menu.

•: Press to open the Split-Screen Selection menu (8 / 16-channel only).

From full-screen single channel view, changes display view to Quad split-screen (4-channel model only)

•S/CH+: Move cursor in menus up; Channel Up.

•X/FWD: Move cursor in menus right; during playback, increase forward playback speed (5X, 15X, 60X).

•W/REW: Move cursor in menus left; during playback, increase reverse playback speed (5X, 15X, 60X)

•

/

: Start/pause forward playback.

Figure 3.0 Remote Control

•T/CH-: Move cursor in menus down; Channel down.

•ESC: Go back / exit menus.

•: Confirm menu selections.

4.: While in Event List menu, press to delete a selected event (no confirm or undo).

5.: During Live Mode and Playback, Press to take a screenshot of the main display—USB flash drive must be connected

(8/16-channel only).

6.Increase/Decrease buttons:

•: Increase the value of selected menu option.

•: Decrease the value of selected menu option.

10