Lorex LH300 Series NOTE:, NOTE:, DVR’s, NOTE:, Lorex device, Update Router, Step 4: Test your connection, Configuring multiple routers, Step 3: Update the router settings

Lorex Auto Port Forwarding Wizard

Step 3: Update the router settings

1.Click the Update Router button.

•You will see your router window open. The Auto Port Forwarding Wizard automatically populates your router with the relevant information. This will take a few moments.

Update Router button

Figure 27.8 Router settings window.

2. Close the update window when the update finishes.

Step 4: Test your connection1.Click the Test Your Connection button.

• Your system’s default browser opens and connects to your Lorex device.

NOTE: Ensure that Internet Explorer is your system’s default internet browser.

NOTE: A window opens that prompts you to enter in your DVR’s user name and password (do not enter your DDNS log in information).

NOTE: ActiveX warnings may appear. Accept all ActiveX installation warnings to connect to your system.

Configuring multiple routers

Your network may have two or more connected routers. During the initial launch of the auto port forwarding wizard, the program scans the network to detect the number of connected routers.

To check for multiple routers:

1.Click the Detect Multiple Routers button ( ).

• A list of connected router populates in the window.

"2" indicates two routers have been detected

Figure 27.9 Router settings window.

73