Starting the System

3.HDD Status: Displays the recording space consumed on the hard disk (%) and the size of the pre-installed hard drive. For example, 250 GB.

4.Camera Status: Displays channel number, recording status, frame rate, and video quality.

5.Date/Time: Displays the date and time on the system.6.Toolbar: Primary control input for the user interface:

 

Toolbar icons are based on firmware version 7.28.08_1890C (4-channel) and

 

1.45.08_1890C (8 &16 channel) and above. To check your firmware version,

 

press the

 

button twice on the remote.

•

: Click to view channel 1 in full-screen.

 

 

 

 

 

 

• : Click to view channel 2 in full screen.•: Click to view channel 3 in full screen.

Figure 4.1 Single channel and Quad (4-channel model)

•: Click to view channel 4 in full screen.•: Click to view Quad split-screen mode (Live View and Playback modes).•: Click to open the system Main Menu. See “Using the Main Menu” on page 29.

• : While in Playback mode, click to increase reverse playback speed (5X, 15X, 60X).

• : From Live View, click to open Playback Mode; click to pause/play video.

•: While in Playback mode, click to increase forward playback speed (5X, 15X, 60X).

•: Click to open the Event List menu. See “Event List” on page 21.•: Click to begin sequence view.•: From the Event List menu, click to delete a selected video file.

NOTE:Be careful when clicking the Trash icon—there is no confirmation for deletion andyou cannot undo the action.

•: Click to show/hide the on-screen display (OSD).• : Click to return to the previous menu, and/or quit menus/modes

•: Opens the PTZ menu (PTZ camera required ,not included, EDGE+ LH320 Series only).

12