Chapter 1

component troubleshooting procedures.

1.5 System Peripherals

The DNCP Series 400/400-CO (PA-8500) can include the peripherals described in the following sections.

V105 Terminal

C419/C619 Modem

Tape and CD-ROM Drives

V105 Terminal

The V105 terminal, which is shipped with most DNCP Series 400/400-CO (PA-8500) systems, is an ASCII character-mode terminal that can be configured to operate as a system console to display system error and status information. The V105 can also be used as a standard user terminal for communicating with system applications. It is available with either an ANSI or PC keyboard. The V105 connects to either the Console (J315) or Auxiliary Console (J316) serial port on the rear of the cabinet. For an illustration of the V105 terminal, (See Figure 1.10)

Figure 1.10. V105 Terminal

DNCP Series 400/400-CO (PA-8500) systems can also support other terminals as long as they are properly defined within the system.

C419/C619 Modem

DNCP Series 400/400-CO (PA-8500) systems are connected to the Lucent Customer Assistance Center (CAC) through a C419/C619 modem and a dedicated telephone line. The C419/C619 modem is preconfigured for RSN operation and can transmit data at 33,600 bps. For an explanation of the RSN, refer to FTX System Administrator's Guide: General Services (R455X). For an illustration of the C419/C619 modem, See Figure 1.11.

Figure 1.11 C419/C619 Modem

]

Page 15
Image 15
Lucent Technologies PA-8500 manual V105 Terminal, C419/C619 Modem