Chapter 5
3.Execute the following script to configure the C419/C619 modem. For more information on the rsninitmodem script, see the rsninitmodem man page.
/usr/stratus/rsn/bin/rsninitmodem
The script displays the following messages as it configures the modem.
Wait ...
..............................................
Verifying ..................
Saving ....
/usr/stratus/bin/rsninitmodem: Done
5.4 Completing and Verifying Configuration of the RSN
Perform the following steps to complete and verify the configuration of the RSN
1.To complete the configuration of the modem, execute the rsn_setup script as shown in the following example.
/usr/stratus/rsn/bin/rsn_setup
This script verifies that the RSN setup is correct and displays the following message:
rsn_setup: completed successfully
If the script displays error messages, take corrective actions as indicated by the script.
2.To verify the configuration, you must first make sure the RSN is disabled by issuing the rsnoff script as shown in the following example.
/usr/stratus/rsn/bin/rsnoff
Press the <Return> key to continue. The script displays the /etc/inittab settings and asks you if they are correct. The settings should be correct. Press the letter y followed by the <Return> key to continue. The script displays a line from the file /var/spool/cron/crontabs/rsn and asks you if this line should be commented out. Press the letter y followed by the <Return> key to continue. If the script completes execution successfully, it displays the following messages:
RSNTRANS HAS BEEN DISABLED /etc/inittab SETTINGS ARE COMMITTED RSN IS NOW OFF
3.To finish verifying the configuration, execute the rsnon script as shown in the following example. This script enables the RSN to work properly.
/usr/stratus/rsn/bin/rsnon
This script displays the following message and prompt. Press the <Return> key to continue.
1. Setting rsn_monitor, rsn_getty, rsndbs to respawn in
