5.In order to monitor the digital signal coming into the 1010LT, switch to the Patchbay/Router page of the control panel software. In the "H/W Out 1/2" column, select the radio button named "S/PDIF In." This will copy all S/PDIF input audio directly over to the analog outputs – therefore in this example, the monitor mixer will be completely bypassed. Once this assignment is made, you may play the DAT material at any time and verify that it is making it into the Delta 1010LT successfully. This can be done regardless of whether or not your recording software is open.
6.Within your recording software, select "S/PDIF In
7.Start your software recording and then start your DAT material playing. You should be able to hear the DAT material through your sound system.
Transferring from 1010LT to DAT, monitoring with DAT
Delta 1010LT
S/PDIF IN
T |
| |
U |
| |
O | MIDI | |
IF | ||
| ||
D |
| |
/P |
| |
S | WORDCLOCK | |
|
S/PDIF IN
analog out
47
