Cables & Hardware
(3)DIO•8 cards for HDR24/96
(3)DIO•8 cards for D8B
(1)Clock I/O card for D8B
(3)TDIF cables
(1)75 Ω BNC word clock cable
Hookup
1.Connect the three TDIF cables between the corresponding TDIF jacks on the HDR24/96 and D8B.
2.When TDIF is used, the D8B must have a Clock I/O card installed. To make the D8B the clock master, connect its Word Clock Out (not
DIO•8 Sync out) to the HDR24/96 Word Clock In. To make the HDR24/96 the clock master, connect its Word Clock Out to the D8B Word Clock In.
HDR24/96 Settings
1.Set the Tape Input format for each DIO•8 card to TDIF, and the Tape Output format to TDIF.
2.If the HDR24/96 is the clock master, set the Sample Clock to Internal; if it
is a clock slave, set it to Word Clock and depress the 75 Ω termination switch on the Sync card.
3.Set the Sample Rate to 44.1kHz or 48kHz according to your preference.
TDIF Hookup with DIO•8
Apogee
Clock I/O
Card
Word Clock Out
APOGEE |
| APOGEE | DIO•8 Cards |
APOGEE | APOGEE | ||
SYNC | DIGITAL I/O | DIGITAL I/O | DIGITAL I/O |
|
|
| TDIF Connection |
Word Clock Out | TDIF | TDIF | TDIF |
Word Clock In
APOGEE |
| OPTICAL |
|
|
|
OPTICAL | OUT | OUT | OPTICAL | OUT | |
ADAT | IN | ADAT | IN | ADAT | IN |
Word Clock In | SYNC |
| SYNC |
| SYNC |
TDIF Cables (DB25)
Digital 8•Bus
Word Clock Out (HDR24/96 as Master)
Depress the Termination button if the HDR24/96 is set to Slave
Word
Clock
Out HDR
(D8B as Sync
Master) Card
Use one only
Word
Clock In
Word
Clock Out
APOGEE |
| APOGEE |
| APOGEE |
|
DIGITAL I/O | DIGITAL I/O | DIGITAL I/O | |||
| TDIF |
| TDIF |
| TDIF |
OPTICAL | OUT | OPTICAL | OUT | OPTICAL | OUT |
ADAT | IN | ADAT | IN | ADAT | IN |
| SYNC |
| SYNC |
| SYNC |
HDR 24/96
TDIF Connection
DIO•8 Cards
D8B Manual • Chapter 4 • page 121